Submit Your Project
> Loofah Soap Tutorial - Part 3
Loofah Soap Tutorial - Part 3
by Rustic Escentuals
There are so many ways to use the versatile little loofah in soaps. Here is a simple, yet creative tutorial showing you one of the many ways you can customize soaps using Loofah slices. Check out Loofah soap tutorial
for more ways to be creative with these!
simple, yet creative loofah soap tutorial
Supplies and equipment needed:
Microwave safe glass containers
Sharp knife to cut soap into cubes
Butter knives for stirring soap
with rubbing alcohol
Basic Square Soap Mold
(3 cavities - 4 ounces each)
to monitor soap temperature
(.75" x 2.25" - 3.25")
Ultra Clear Melt & Pour soap base
Mittens and Mistletoe Fragrance Oil
Gel Soap Colors
of your choice
gather your basic supplies
including your mold, colorants, and fragrance oil
Depending on how many loofah soaps you will be making, you'll be using 3.5 ounces of melt and pour soap base for each finished product.
While this is a 4-ounce soap mold cavity, the loofah will displace some of the soap, therefore I find that 3.5 ounces of soap base is sufficient. I like to melt maybe 3.7 ounces as some of the soap base always remains in the container.
Cut up approximately 12 ounces of Ultra Clear Melt & Pour soap base into small cubes using a sharp knife.
Using a microwave safe container, melt 3.5 to 3.7 ounces of cubed soap base in a microwave using 15 - second bursts until melted. Do not burn or boil, this will result in a poor quality rubbery soap. If there are any small chunks of soap left, stir slowly; the heat of the soap will melt these small chunks.
Add 3 - 4 drops of Gel Soap Colorants of your choice to the soap base and slowly stir. In this tutorial I will be using 3 different ones: Orange, Canary Yellow and Dark Purple.
Use a thermometer to monitor the soap base temperature. I like to keep my soap base around 145 degrees or cooler before adding and any fragrance oils or additives.
add 3-4 drops of desired gel soap colorant and stir slowly
Using a disposable pipette, add 2 ml of Mittens & Mistletoe Fragrance Oil into the container and stir in slowly.
add your fragrance oil and stir slowly to combine
Making sure the soap is around 135 degrees; pour a thin layer of soap into one of the cavities.
pour thin layer of soap into one of the soap mold cavities
Spritz this layer with alcohol to remove any bubbles.
spritz first layer with rubbing alcohol to remove any bubbles
Spritz one of the Loofah slices with alcohol to help it adhere into the soap and gently press it into this first layer. To prevent it from floating up when you pour the remainder of the melted soap into the cavity, wait approximately 45 seconds for the soap to harden around the loofah.
spritz the loofah with rubbing alcohol
add to first layer of soap
let set 45 seconds for soap to harden before pouring next layer
Spritz the cavity one more time and pour the remainder of the melted soap into the mold. Pour slowly until it reaches the top. Follow up with one last spritz of alcohol to remove any bubbles.
pour remainder of soap into the mold
spritz one final time to remove those darn bubbles
Repeat steps 2 to 8 using a different gel colorant. Continue repeating these steps for each color you choose.
If you decide to use one color for all 3 cavities, melt all 12 ounces of soap at one time; use 6 - 7 drops of gel colorant, and 5 ml of fragrance oil.
repeat with different colors
After you have finished pouring, allow the soaps to set overnight or at a minimum 3 to 4 hours.
put the soap to bed for several hours or overnight
Gently press on the underside of the mold to release the soap. If soap doesn’t release, stick in the freezer for about 5 minutes.
gently press bottom of mold to release and voila! lovely little loofah squares
Go on and make more Loofah soap using all 3 tutorials! Enjoy!!
loofah soap 3 different ways!
return to top of page
Search the Library
Bath & Body
Misc Craft Projects
Business Side of Crafting
View All Tutorials
Submit Your Project
. All rights reserved.
website designed by Cherie